Nr. i Art. 533376

fischer double-threaded screw STSI M10 x 181 mm A2, stainless steel A2

Top Features
  • Lower thread for steel
  • Upper metric thread
  • Incorporated EPDM gasket
  • Made of A2 stainless steel

Përparësitë / Përshkrimi

Double-threaded screw for PV installations on corrugated panel roofs and steel load-bearing structures
Advantages
  • The STSI double-threaded screw is supplied pre-assembled with EPDM gasket, tightening nut and pair of nuts for connection to the MW or SSP brackets.
  • Quick installation because the roofing must not be removed during installation.
  • The integrated gasket enables better sealing against splashing rain.
STSI is the double-threaded screw in A2 stainless steel for fixing subframes of photovoltaic systems on corrugated panel or faux-barrel tile roofs to wooden load-bearing structure. Also suitable for installation on concrete with chemical injection mortar or in brick and cement structure with chemical injection mortar and FIS HK or FIS HN injection anchor sleeves. Incorporated EPDM gasket for sealing against rain infiltration.
Properties
  • Steel beams and rails with panel thickness between 2 to 4 mm

Aplikimi dhe leja (autorizimi)

Applications
Suitable for corrugated panel roof system:
  • SolarFish H33
  • SolarFish H44
STSI double-threaded screw fixing:
  • Directly on steel beams and rails after drilling the pilot hole
Building materials
  • Steel beams and rails with panel thickness between 2 to 4 mm
Detajet (materialet e ndërtimit, ngarkesat, etj.) të çdo miratimi të disponueshëm zbatohen. Dokumentet e mëtejshme mund të gjenden në Qendra e shkarkimit.
Miratimet
  • TUV - R 60154136

Manuali i montimit

Functionality
  • Determine the length of the STSI double-threaded screw depending on the thickness of the load-bearing structure.
  • Determine the centre distance of the STSI double-threaded screws according to the snow and wind loads of the installation area and inclination of the roof.
  • Identify the position of the STSI double-threaded screws depending on the load-bearing structure and the layout of the installation.
  • Drill the support according to the diameter of the screw and the type of support. Use a pilot drill diameter of 6.8 mm for a steel thickness of 1.5-5.0 mm. Use a pilot drill diameter of 7.0 mm for a steel thickness of 6.0 mm and a pilot drill diameter of 7.2 mm for a steel thickness of 8.0 mm. For a steel thickness of > 10 mm, use a pilot drill diameter of 7.4 mm.
  • Screw the STSI double-threaded screw into the structure by putting the EPDM rubber in contact with the roof.
  • Tighten the MU nut on the gasket to maintain waterproofness.
  • Fix the SSP or MW connection plate, adjusting its height using the MU nuts.
Mounting Strip 1 Picture
1 / 6

Të dhënat teknike

Diameter (
d
)
8 mm
Shaft length (
L
)
8,5 mm
Metric thread length 50 mm
Amount 10 pcs.
GTIN (EAN-Code) 8001132046456

Dokumente për shkarkim

Certificate
pdf, TUV - R 60154136
TUV Certificate
E vlefshme nga 11.01.2021
deri në 11.01.2026
Solar systems. Mounting solutions for photovoltaic panels.
cd-green-58bb58464c-47qvg