Concrete screw UltraCut FBS II CP US

Variantet e produktit

Miratimet / Raportet e testimit

19 variante produktesh

Drill diameter

Min. drill hole depth for through fixings

Nominal embedment depth / thickness of fixture

Drive

Legjenda = Miratimi ekziston— = Miratimi nuk ekziston

më shumë rrezultate

Gesehen 18 von 19 Variante(n)

Advantages

The innovative surface coating ensures additional protection against corrosion compared to the galvanized concrete screw FBS II (proved also through salt spray test over 2.000h).
The special saw tooth geometry enables fast cutting into the concrete.
The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
Cleaning the drilled hole is not necessary in case of vertical installation (in ceilings and floors) and when using hollow drills. The hole must be drilled 3x the drill hole diameter deeper for holes drilled in floors.
Approval-compliant adjustment allows the concrete screw to be unscrewed twice and the fixture to be underlaid or adjusted.
Three approved embedment depths allow the screws to be used in a wide range of applications, ensuring excellent flexibility.
The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.

Applications

Guard rails
Consoles/Base plates
Metal profiles
Steel constructions
Façades
Protection barriers

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Bricks of clay (EN771-1)
Solid sand-lime brick (EN771-2)
Perforated sand-lime brick (EN771-2)

Suitable for:

Concrete C12/15
Solid building materials
Masonry with a dense structure

Detajet (materialet e ndërtimit, ngarkesat, etj.) të çdo miratimi të disponueshëm zbatohen. Dokumentet e mëtejshme mund të gjenden në Qendra e shkarkimit.

Miratimet

ETA-15/0352
ETA-20/0134
DoP No. 0185
DoP No. 0227
DoP No. 0311
20200238-2

Functionality

The UltraCut FBS II CP US is suitable for push-through installation.
Cleaning the drilled hole is not necessary for installation in ceilings and floors, and when using hollow drills. For drill holes in floors, you must drill 3x deeper than the drill diameter.
A tangential impact wrench with a suitable nut is recommended for installation (recommended: fischer FSS 18V).
If the screw head is in contact with the fixture, the correct installation of the screw is ensured (visual setting check).

Mounting Strip 1 Picture

1 / 7

Mounting Strip 2 Picture

1 / 3

Mounting Strip 3 Picture

1 / 2

ETA Certification Document

pdf, ETA-15/0352

European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete

Krijuar me 05.10.2020

DOP - Declaration of Performance

pdf, DoP No. 0227

Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)

Krijuar me 19.10.2020

ETA Certification Document

pdf, ETA-20/0134

European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry

Krijuar me 14.07.2022

DOP - Declaration of Performance

pdf, DoP No. 0311

Declaration of Performance for fischer concrete screw UltraCut FBS II (screw anchor for use in masonry)

Krijuar me 28.07.2022

DOP - Declaration of Performance

pdf, DoP No. 0185

Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)

Krijuar me 27.11.2020

Certificate

pdf, 20200238-2

Examination Certifate

Krijuar me 13.10.2020

Load Table

pdf,

Concrete screw UltraCut FBS II US/SK - Permissible loads for a single anchor in masonry for Push-through installation.

Load Table

pdf,

Concrete screw Ultracut FBS II US hexagon head with integral washer and FBS II SK countersunk head - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Installation Instructions

pdf,

UltraCut FBS II 8-14 GVZ/CP

Marketing Documents

pdf,

UltraCut FBS II.

Epoxy mortar FIS EM Plus
4 variantet

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	65 mm
Nominal embedment depth / thickness of fixture( h_nom1 / t_fix )	50 / 5 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture	—
Drive	TX40 / SW 13
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962403183

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	80 mm
Nominal embedment depth / thickness of fixture( h_nom1 / t_fix )	50 / 20 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture( h_nom3 / t_fix )	65 / 5 mm
Drive	TX40 / SW 13
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962403190

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	90 mm
Nominal embedment depth / thickness of fixture( h_nom1 / t_fix )	50 / 30 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture( h_nom3 / t_fix )	65 / 65 mm
Drive	TX40 / SW 13
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962403206

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	100 mm
Nominal embedment depth / thickness of fixture( h_nom1 / t_fix )	50 / 40 mm
Nominal embedment depth / thickness of fixture	—
Nominal embedment depth / thickness of fixture( h_nom3 / t_fix )	65 / 55 mm
Drive	TX40 / SW 13
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962403213

ETA-approval
Drill diameter( d₀ )	8 mm
Min. drill hole depth for through fixings( h₂ )	110 mm
Nominal embedment depth / thickness of fixture( h_nom1 / t_fix )	50 / 50 mm
Nominal embedment depth / thickness of fixture( h_nom2 / t_fix )	- mm
Nominal embedment depth / thickness of fixture( h_nom3 / t_fix )	65 / 35 mm
Drive	TX40 / SW 13
Packaging	—
Amount	50 pcs
GTIN (EAN-Code)	4048962403220

Concrete screw UltraCut FBS II CP US

Variantet e produktit

Përparësitë / Përshkrimi

Aplikimi dhe leja (autorizimi)

Manuali i montimit

Dokumente për shkarkim