Concrete screw UltraCut FBS II CP US
  • Product Picture: "fischer UltraCut FBS II CP 8x80 30/15 US TX"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Application Picture
      Nr. i Art. 557783

      fischer UltraCut FBS II CP 8x80 30/15 US TX

      Variantet e produktit
      Download of image data
      Top Features
      • The innovative surface coating ensures additional protection against corrosion compared to the galvanised concrete screw FBS II.
      • The special saw tooth geometry enables fast cutting into the concrete.
      • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
      • Suitable for use in corrosive environments (C3) according to internal technical data from fischer.
      • The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates.

      Përparësitë / Përshkrimi

      The high-performance concrete screw for absolute installation ease with special coating.
      Advantages
      • The innovative surface coating ensures additional protection against corrosion compared to the galvanized concrete screw FBS II (proved also through salt spray test over 2.000h).
      • The special saw tooth geometry enables fast cutting into the concrete.
      • The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
      • Cleaning the drilled hole is not necessary in case of vertical installation (in ceilings and floors) and when using hollow drills. The hole must be drilled 3x the drill hole diameter deeper for holes drilled in floors.
      • Approval-compliant adjustment allows the concrete screw to be unscrewed twice and the fixture to be underlaid or adjusted.
      • Three approved embedment depths allow the screws to be used in a wide range of applications, ensuring excellent flexibility.
      • The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates.
      • The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups.
      The fischer UltraCut FBS II CP US concrete screw has an innovative surface coating and is a powerful anchoring solution for fast installation and with a better corrosion behaviour of the coating. The European Technical Approval for cracked concrete and non-cracked concrete as well as for seismic loads and classification into fire resistance class R 120 guarantee even more safety. The saw tooth geometry enables a quick and easy installation. No drill hole cleaning is required for installation in ceilings and floors. The expansion-free anchorage system enables low edge and axial clearances.

      Aplikimi dhe leja (autorizimi)

      Applications
      • Guard rails
      • Consoles/Base plates
      • Metal profiles
      • Steel constructions
      • Façades
      • Protection barriers
      Building materials
      Approved for:
      • Concrete C20/25 to C50/60, cracked and non-cracked
      • Bricks of clay (EN771-1)
      • Solid sand-lime brick (EN771-2)
      • Perforated sand-lime brick (EN771-2)
      Also suitable for:
      • Concrete C12/15
      • Solid building materials
      • Masonry with a dense structure
      Detajet (materialet e ndërtimit, ngarkesat, etj.) të çdo miratimi të disponueshëm zbatohen. Dokumentet e mëtejshme mund të gjenden në Qendra e shkarkimit.
      Miratimet
      • ETA-15/0352
      • ETA-20/0134
      • DoP No. 0185
      • DoP No. 0227
      • DoP No. 0311
      • 20200238-2

      Manuali i montimit

      Functionality
      • The UltraCut FBS II CP US is suitable for push-through installation.
      • Cleaning the drilled hole is not necessary for installation in ceilings and floors, and when using hollow drills. For drill holes in floors, you must drill 3x deeper than the drill diameter.
      • A tangential impact wrench with a suitable nut is recommended for installation (recommended: fischer FSS 18V).
      • If the screw head is in contact with the fixture, the correct installation of the screw is ensured (visual setting check).
      Shikoni udhëzimet e montimit si PDF
      Mounting Strip 1 Picture
      1 / 7
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture
      • 7
        Mounting Strip 1 Picture
      Mounting Strip 2 Picture
      1 / 3
      • 1
        Mounting Strip 2 Picture
      • 2
        Mounting Strip 2 Picture
      • 3
        Mounting Strip 2 Picture
      Mounting Strip 3 Picture
      1 / 2
      • 1
        Mounting Strip 3 Picture
      • 2
        Mounting Strip 3 Picture

      Të dhënat teknike

      ETA-approval
      Drill diameter (
      d0
      )      		8 mm
      Min. drill hole depth for through fixings (
      h2
      )      		90 mm
      Screw dimension (
      ds x ls
      )      		10.0 x 80 mm
      Nominal embedment depth / thickness of fixture (
      hnom1 / tfix
      )      		50 / 30 mm
      Nominal embedment depth / thickness of fixture (
      hnom3 / tfix
      )      		65 / 65 mm
      Drive TX40 / SW 13
      Amount 50 pcs
      GTIN (EAN-Code) 4048962403206

      Dokumente për shkarkim

      ETA Certification Document
      pdf, ETA-15/0352
      European Technical Assessment for fischer concrete screw ULTRACUT FBS II - Mechanical fasteners for use in concrete
      Krijuar me 05.10.2020
      DOP - Declaration of Performance
      pdf, DoP No. 0227
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical anchor for use in concrete)
      Krijuar me 19.10.2020
      ETA Certification Document
      pdf, ETA-20/0134
      European Technical Assessment for fischer concrete screw UltraCut FBS II - Screw anchor for use in masonry
      Krijuar me 14.07.2022
      DOP - Declaration of Performance
      pdf, DoP No. 0311
      Declaration of Performance for fischer concrete screw UltraCut FBS II (screw anchor for use in masonry)
      Krijuar me 28.07.2022
      DOP - Declaration of Performance
      pdf, DoP No. 0185
      Declaration of Performance for fischer concrete screw ULTRACUT FBS II (Mechanical fastener for use in concrete)
      Krijuar me 27.11.2020
      Certificate
      pdf, 20200238-2
      Examination Certifate
      Krijuar me 13.10.2020
      Load Table
      pdf,
      Concrete screw UltraCut FBS II US/SK - Permissible loads for a single anchor in masonry for Push-through installation.
      Load Table
      pdf,
      Concrete screw Ultracut FBS II US hexagon head with integral washer and FBS II SK countersunk head - Permissible loads of a single anchor in normal concrete of strength class C20/25.
      Installation Instructions
      pdf,
      fischer UltraCut FBS II 8-14 GVZ/CP
      Marketing Documents
      pdf,
      UltraCut FBS II.
      cd-green-64c8fdbcdb-wwzx7